Pressure Gauge Selection Guide for Philippine Plants

Industrial lighting, valves, filtration and instrumentation for the Philippines since 2005sales@ultrapowerindustrialinc.com

Pressure Gauge Selection Guide for Philippine Plants

November 13, 2026By Khalil Joseph Banares5 min read

The pressure gauge is the simplest instrument in a plant and often the most neglected. Operators glance at it on every round, and a failed or inaccurate gauge can hide a developing fault until a pump, filter or boiler is already in trouble. Selecting the right gauge costs very little compared with the plant it protects.

This guide explains how to specify a pressure gauge for Philippine industrial use, covering dial size, accuracy class, range, case and fill, wetted materials and the accessories that extend gauge life. It is intended for maintenance teams, designers and purchasing staff preparing an inquiry.

Understand the Gauge Types

Bourdon tube gauges are the standard choice for most liquids, gases and steam. Diaphragm gauges suit low pressures and corrosive or viscous media. Capsule gauges serve very low pressure gas applications. Differential gauges show the pressure drop across a filter or strainer and are valuable for deciding when to clean or replace a filter element.

Match the type to the service. A Bourdon gauge on a sludgy polymer line will clog, while a diaphragm gauge with a flushing connection will keep working.

Dial Size and Readability

Common dial sizes are 63, 100 and 160 millimetres. Use 100 millimetres as a sensible default for plant piping where operators read the gauge from a walkway. Choose 160 millimetres where the gauge is mounted high or read from a distance, and 63 millimetres only for skid-mounted or panel applications where space is limited.

Consider the scale. A scale with a clearly marked normal operating band lets an operator spot a deviation at a glance. Dual-scale dials showing both bar and psi are common in the Philippines, where drawings and equipment from different origins often mix units.

Range and Accuracy Class

Select a range so that normal pressure falls between one third and two thirds of the scale, with a maximum working pressure no higher than about three quarters of full scale for steady service. For pulsating pressure, such as reciprocating pump discharge, keep normal pressure lower on the scale.

Accuracy classes for industrial gauges generally range from coarse to precision grades. Standard industrial gauges are adequate for monitoring. Use a higher accuracy class for test and calibration duty or where the reading informs a process decision.

Case, Fill and Environment

A liquid-filled case dampens vibration and pulsation, protects the movement from humidity and extends service life. This is especially valuable near pumps, compressors and engines. In the humid, salty coastal environments common across the Philippines, a sealed and filled stainless steel case resists corrosion and internal condensation far better than a dry painted steel case.

Look for a safety pattern case with a blow-out back, so that a ruptured Bourdon tube releases pressure safely to the rear instead of towards the operator.

Wetted Materials and Connections

Copper alloy wetted parts are acceptable for clean water and air. Stainless steel is preferred for seawater, chemicals, steam and general plant use. Check compatibility with oxygen, acetylene, ammonia and chlorine services, which have particular material and cleanliness requirements.

Choose the connection thread and position to suit the piping standard in your plant. Lower mount is the standard; back mount suits panel use. Confirm the thread type and size to avoid adapter stacks that add leak points.

Accessories That Extend Gauge Life

A needle valve or gauge isolation valve allows removal for service without a shutdown. A pulsation dampener or restrictor protects against surges. A siphon or pigtail keeps live steam away from the Bourdon tube. A diaphragm seal protects against corrosive, hot or clogging media. Each accessory costs little compared with repeated gauge replacement.

Calibration and Replacement

Gauges drift with age and abuse. Establish a calibration or replacement schedule, and mark gauges with the next due date. Replace any gauge with a bent pointer, cracked lens, leaking fill or a pointer that does not return to zero. Never ignore a gauge that reads unusually steady in a system that should fluctuate, because it may be stuck.

Pressure Gauge Selection Summary

Item Options Guidance
Gauge type Bourdon, diaphragm, capsule, differential Bourdon for most; diaphragm for corrosive or viscous media
Dial size 63, 100, 160 mm 100 mm default; 160 mm for distance reading
Range Scale selection Normal pressure at one third to two thirds of scale
Case Dry or liquid-filled Filled stainless case for vibration and humid sites
Wetted parts Copper alloy or stainless Stainless for seawater, chemicals and steam
Accessories Isolation valve, dampener, siphon, seal Add as the service requires

Pressure Gauge Specification Checklist

  • Gauge type matches the medium and the service
  • Dial size suits the reading distance
  • Range puts normal pressure between one third and two thirds of scale
  • Liquid-filled stainless case chosen for vibrating or coastal service
  • Wetted material compatible with the fluid
  • Thread type, size and mounting position confirmed
  • Isolation valve, dampener, siphon or seal fitted where needed
  • Calibration due date marked and recorded

Frequently Asked Questions

What dial size is best for plant piping?

A 100 millimetre dial is the usual default. Use 160 millimetres where the gauge is read from a distance or mounted high.

Why use a liquid-filled gauge?

The fill dampens vibration and pulsation, protects the movement and slows corrosion from humidity, which extends gauge life near pumps and in coastal plants.

What range should I select?

Normal operating pressure should fall between one third and two thirds of the scale, and maximum working pressure should not exceed about three quarters of full scale in steady service.

When should a gauge be replaced?

Replace it if the pointer is bent, the lens is cracked, the fill is leaking, or the pointer does not return to zero.

Related Reading

Contact Ultra Power for Inquiries

Ultra Power supplies pressure gauges and related instrumentation for Philippine plants, and can advise on the correct type, range and accessories for your service. Please contact Ultra Power for inquiries, and our engineering team will respond with practical guidance for your project.

Need a quotation or technical assessment?

Send the specifications. We respond within one business day.

Request Free Assessment

Download Our Free Industrial Lighting Compliance Guide

A complete reference for Philippine plant engineers and procurement officers.

Download Free Guide

Get the Ultra Power Company Profile 2026

Our products, brands, industries served and track record since 2005.

View Company Profile (PDF) →
© 2026 Ultra Power Industrial Resources, Inc. | Unit 105 Teylan Building, 6917 Washington St., Makati CityContact